Structural Composite Lumber Core Wood Doors

Continued

(10) 5/16" FireLite® Plus glass is required if total area of opening(s) exceeds 1296 sq. in. of visible glass or one continuous dimension of 54" in height or one continuous dimension of 30" in width.

(11)

Glazing 1296 sq. in or less
20 minute >1296 sq. in.
20 minute

1/4" Wired Glass Trim-lite(TM) Wood Moulding or Metal Vision Frame NA

1/4" Superlite NA NA

3/16" FireLite(R) NT Metal Vision Frame NA

5/16" FireLite Plus Fire-Trim Wood Moulding or Metal Vision Frame Fire-trim Wood Moulding or Listed Metal Vision Frame (13)

(12) All Marshfield DoorSystems Fire-Rated doors must be machined by Marshfield DoorSystems or other approved fire door machiners. Factory machining of surface-mounted exit devices with face holes 1 " and larger is offered.
(13) When using All Metal Stamping Metal Vision Frame 118M, UL label only.
(14) Positive Pressure doors which meet UBC 7-2-97 requirements are available with ITS-WH labels only.

Previous Page >>>

Light mouldings are installed on one side and other side is precut for field installation after glazing. Mouldings are set for 5/16" Firelite Plus glass thickness. Marshfield DoorSystems will factory glaze upon request.

ITS-WH and UL approved with 5/16" FireLite Plus glass only. Downset may vary due to allowable tolerance deviations in components.

Note: Marshfield DoorSystems doors are manufactured per the standards listed. Specifications are subject to change without notice.